You are here: Home > Device > Access Control > Door Strike Power Supply
 
 

Configure Door Strike Power Supply from Device LCD

Follow the below mentioned steps to configure Door Strike Power Supply from the Device:

 

  1. Swipe to the Door Access app from the Menu screen. Tap on the Door Access icon. The Device will prompt for Device Security Authentication before opening the app (The default PIN is 0000).

  2. Tap on Door Strike Power Supply.

  3. Toggle Status to ON to enable settings.

  4. Select supply mode as 12V or 24V (TOUCH 2 and SENSE 2 only support a 12V door strike) and tap the Save icon on the top right to store the settings.